18V Cordless Finish Nailers NT1865DBAL
18V Cordless Finish Nailers NT1865DBAL Nailing(Li-ion Cordless Tools) Hikoki Power tools Selangor, Malaysia, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | Way Ne Hardware Supply Sdn Bhd

More nails per charge

with The 18V Li-ion battery and highly efficient brushless motor

Comparison of Nails per Charge*

The NT1865DBSL cordless finish nailer, for example, drives up to 2,650 nails per charge with a 6.0Ah battery, up to 2,450 nails with a 5.0Ah battery and up to 1,500 nails with a 3.0Ah battery.
  • The number of nails per charge may vary depending on operating conditions, hardness of work pieces, etc.

Lower running costs

No cost of gas cartridges means that the more the tool is used, the more cost-effective it will be.

Comparison of Total Cost*1

When you drive more than 4,900 nails, the total running cost will be lower than a gas nailer.
  1. Without the cost of nails.
  2. The numbers of total cost are relative values when the initial cost of competitor's gas brad nailer is indexed at 100.
  3. Electricity cost may vary depending on the area.

Ease of use with great comfort

  • A unique air spring drive system that uses the compressed air sealed in the main unit brings various advantages of pneumatic technologies.

    • Drives 3 nails per sec. with zero ramp-up time and quicker response time between drives.
    •  Low-recoil, yet powerful enough to set nails flush consistently.
    • No combustion noise and no gas fumes.
    • Consistent performance even at low temperatures or high altitudes. (The operating environment for these products is between 0¡æ and 40¡æ.)
    Air Spring Drive System
    Low temperatures or high altitudes
  • Integrated Operation Panel with Push-button Switches to select between full sequential mode or contact mode, and check remaining battery power.

    Operation Panel
  • Tool-less Depth of Drive Adjustment

    Adjuster
  • LED Light

    LED Light
  • Integrated Hook

    Hook

Dry-fire Lockout prevents nailer activation when the nail count is low. (NT1865DBAL and NT1865DBSL only)

Less maintenance

No gas means no need of regular cleanings of a combustion chamber that a gas nailer would require. The brushless motor is also low-maintenance due to no wearing parts.

  • Our Original Brushless Motor Technology

    ► No wearing parts (carbon brushes, commutator, rotor coil)
    ► Our original compact controller

Battery compatibility

The battery is compatible with all Our 18V slide-type Lithium-ion cordless tools.

Specifications

Model NT1865DBAL
Driving System Air Spring
Nail Length 32mm to 65mm
Driving Speed 3nails/sec. (Intermittent)
Loading capacity 100 nails (1 strip)
Firing Mode Full sequential / Contact (Selectable)
Battery Voltage 18V
Dimensions
(H x L x W)
BSL1860
BSL1850
344 x 310 x 104mm
BSL1830C 344 x 300 x 104mm
Weight (Battery included) *1 3.8kg with BSL1860
3.5kg with BSL1830C
Standard Accessories *2 Charger (UC18YFSL or UC18YSL3), 2 Batteries (BSL1860 or BSL1830C), Battery Cover, Nose Cap, Stackable Case, Safety Glasses
  1. Hook excluded.
  2. Standard accessories vary by country or area.
CAUTION REGARDING LITHIUM-ION BATTERY TRANSPORTATIONCAUTION
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION

Notify the transporting company that a package contains a lithium-ion battery, inform the company of its power output and follow the instructions of the transportation company when arranging transport.

  • Lithium-ion batteries that exceed a power output of 100Wh are considered to be in the freight classification of Dangerous Goods and will require special application procedures.
  • For transportation abroad, you must comply with international law and the rules and regulations of the destination country.

Applicable nail sizes

mm (in.)

For NT1865DBAL

Image of nail L 32(1-1/4) - 65(2-1/2)
A 2.4(.095)
B 3.0(.12)
C 1.1(.045)
D 1.8(.072)

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version